Wednesday, September 24, 2014

RSIs: Repetitive Strain Injuries

Repetitive strain injuries are activity-related injuries to the musculoskeletal system, and they are more common in construction than in any other industry. Also known as cumulative trauma disorders, repetitive motion disorders, and overuse syndrome, RSIs are the leading cause of occupational disease in the United States and cost billions of dollars each year in workers’ compensation.

Work-related RSIs result when the body is subjected to stresses caused by repetitive tasks, forceful exertions, vibrations, mechanical compression, or sustained awkward positions. Some common RSIs are carpal tunnel syndrome, thoracic outlet syndrome, Raynaud’s syndrome, and trigger finger. Jackhammer operators can suffer hand-arm vibration syndrome, painters frequently suffer from tennis elbow, and plumbers often develop rotator cuff tendonitis from working with their arms above shoulder level.

Preventing RSIs

To prevent RSI, identify hazards in the workplace and take steps to correct them. Be aware of early symptoms such as pain or tingling in neck, shoulders, arms or hands. Break up prolonged repetitive movement with rest periods, or by rotating tasks. Stretch or move around if you experience any task-related discomfort. Use ergonomic tools specifically designed for the task at hand. Arrange layout of tools and equipment to minimize excessive stretching and bending, and practice proper lifting techniques. Because cold can increase RSIs, especially those related to vibration, wear gloves or use hand warmers when possible. Use ergonomic PPEs such as back supports, wrist and arm supports, and elbow and knee pads, vibration dampening gear, and boots with good ankle support.

About R. Baker & Son All Industrial Services

R. Baker & Son All Industrial Services, a Service-Disabled Veteran-Owned Small Business (SDVOSB) in business since 1935, is a premier specialized contractor operating in the United States, Canada and Puerto Rico, with over one hundred employees and an exemplary safety record (we have been directly involved in four sites that received VPP OSHA Safety Awards). R. Baker & Son is financially strong, with bonding capabilities over $10 million. Capabilities include industrial and commercial demolition, rigging, machinery- and plant-moving, dismantling, decommissioning, plant and equipment relocation, interior demolition, selective demolition, warehousing, wrecking and razing, millwright, plant reconfigurations, heavy rigging, salvage, environmental services, remediation, decontamination, abatement, and investment and asset recovery.

Demolition, wrecking and razing, rigging, millwright, plant reconfigurations, heavy rigging, Service-Disabled Veteran-Owned Small Business / SDVOSB, salvage, dismantling, decommissioning, plant and machinery moving, building demolition, riggers, environmental services, remediation, decontamination, abatement, interior demolition, investment and asset recovery.

R. Baker & Son All Industrial Services
1 Globe Court
Red Bank, NJ 07701
Phone: 732-222-3553
Fax: 732-450-0311
Web: http://www.rbaker.com
Facebook: https://www.facebook.com/Demolition.Rigging

Saturday, September 6, 2014

Mold Remediation on Demolition Projects

Oftentimes while performing demolition, selective demolition, dismantling, plant decommissioning or plant relocation projects, R. Baker & Son encounters mold growth.  Mold exposure can cause adverse health issues ranging from mild to very serious, so it is important that mold remediation is performed properly.  R. Baker & Son is expert in various environmental services including mold remediation.

Mold is a fungus that requires excess moisture to grow. This moisture can be come from a variety of sources such as flooding, leaks, poor drainage, standing water, sweating pipes, inadequate dehumidification, etc. If the building is not undergoing total demolition, it is important to identify and eliminate the source of the moisture. 

Merely applying a biocide such as bleach is not enough to eliminate health threats, as mold maintains its allergenic and toxic qualities even when in a non-viable state.  Mold must be physically removed using a specifically a formulated detergent solution, or effected building materials must be completely removed from the environment.  Where mold growth is extensive, remediation must be carefully controlled to minimize health and building contamination risks.

Because mold remediation was developed using asbestos abatement practices, the two abatement methods are similar with the exception of using water to suppress airborne particles. Affected areas must be contained with plastic sheeting to prevent mold from contaminating other building areas.  Remediation workers must be equipped with proper PPE including respirator, gloves, goggles, and, at times, protective suits. Mold-contaminated materials should be removed in large pieces where possible to avoid aerosolizing mold spores, then sealed in heavy polyethylene bags or sheeting.  After a settlement, remediation workers should clean the area with HEPA vacuums and damp-wiping with a bleach solution.  Air ducts, ventilation systems, and air handling units should be evaluated and remediated as well. 

When mold is encountered on any type of project, R. Baker & Son personnel are 100% OSHA safety trained and equipped to handle mold remediation, as well as many other environmental services.  Please contact us at 732-222-3553 to discuss your needs. 

R. Baker & Son All Industrial Services
1 Globe Court
Red Bank, NJ 07701
Phone: 732-222-3553
Fax: 732-450-0311
Web: http://www.rbaker.com
Facebook: http://rbaker.com/rigging-contractors.php