Monday, November 14, 2011

R. Baker & Son in ACT Magazine Sept 2011

R. Baker & Son in ACT Magazine Sept 2011


R. Baker & Son was recently featured in the American Cranes & Transport (AC&T) magazine as well as on their online website. The article is entitled " Rigging, moving a 9/11 memento" (click on link to view)


About R. Baker & Son All Industrial Services

R. Baker & Son All Industrial Services is the premier specialized contractor in the United States, Canada and Puerto Rico. The Service-Disabled Veteran-Owned Small Businesses (SDVOSB) has been in business since 1935, has over 100 employees, an exemplary safety record (We have been directly involved in four (4) sites that received VPP OSHA Safety Awards) and is financially strong (bonding capabilities over $10 Million). Capabilities include industrial and commercial demolitionriggingmachinery & plant movingdismantlingdecommissioningplant and equipment relocationinterior demolitionwreckingselective demolition , demolition contractors in NJ and warehousing.

R. Baker & Son All Industrial Services
1 Globe Street
Red Bank, NJ 07701
Phone: 732-222-3553
Fax: 732-450-0311
Website: www.rbaker.com
For more information visit our website or contact Damon Kozul, PE, CHMM atdkozul@rbaker.com

Friday, July 29, 2011

Babbit Scrap Metal For Sale

Babbit Scrap Metal For Sale

We demolished an old power plant with Babbitt bearings. We have 5000 lbs of Babbitt for sale

The analysis showed that the Babbitt had a 80-¬‐85% Tin Content (different pieces had different %’s), and the remaining contents were Antimony, Copper, and traces of other metals (less than 1%). If interested contact Damon dkozul@rbaker.com or call
http://www.rbaker.com/

go to photo album below for pictures of the babbitt scrap metal


Wednesday, May 25, 2011

200 KW Generator Genset For Sale Detroit Diesel Kohler

200 KW Generator For Sale


Kohler with a Detroit Engine - ASKING $8000
Model 200R0ZD71
Spec 132407-71
Serial 259099
60 hz
1800 rpm
24v battery


Volt 120/208 139/240 277/480 120/240 120/240


Phase 3 3 3 3 1
Power factor .8 .8 .8 .8 1.6

KW 200 (all)             KVA 250 (all)
AMP 694 601 301 601

We have unit in staten island (near goethals bridge). We will load onto your truck

Unit is in running condition!
Approx. 200 gallon built in fuel tank
Approx. 5 x 10 in dimension
Picture of the generator are shown below.  Please contact Damon Kozul, PE, CHMM at 732-222-3553 or at dkozul@rbaker.com to make an inquiry or request additional information




Friday, April 29, 2011

Pharmaceutical Equipment Rigging Project Completed by R. Baker & Son

R. Baker and Son Completes Fast Paced Pharmaceutical Rigging Project

R. Baker & Son All Industrial Services recently completed a very fast pased pharmaceutical rigging project for EquipNet, Inc. The rigging project was conducted at the Roche facility in Nutley, New Jersey. EquipNet, Inc. conducted an auction of used pharmaceutical equipment from one of the buildings at the Roche facility. R. Baker & Son All Industrial Services was selected as the preferred rigging contractor for the removal of sold assets. Equipment rigged carefully out of the building included sensitive pharmaceutical equipment including reactors, tanks, fluid bed dryers, isolators, servo lifts and other related equipment.

The rigging crews were lead by the family team of Ken and Jesse Paszkewicz who are some of our top riggers in the company. EquipNet was very impressed with "Team" Paszkewicz and commended R. Baker & Son on our efficiency, safety and our ability to meet a demanding project schedule. The project was completed safely in approximately 3 months.

EquipNet, Inc. is the world’s leading provider of proactive asset management services and solutions for large and small corporations in the pharmaceutical, biotech, chemical, and consumer packaged goods industries. EquipNet’s vision is to revolutionize the way companies manage their surplus assets.

About R. Baker & Son All Industrial Services

R. Baker & Son All Industrial Services is the premier specialized contractor in the United States, Canada and Puerto Rico. The Veteran Owned Small Business Enterprise has been in business since 1935, has over 100 employees, an exemplary safety record (We have been directly involved in four (4) sites that received VPP OSHA Safety Awards) and is financially strong (bonding capabilities over $10 Million). Capabilities include industrial and commercial demolition, rigging, machinery & plant moving, dismantling, decommissioning, plant and equipment relocation, interior demolition, wrecking, selective demolition , demolition contractors in NJ and warehousing.

R. Baker & Son All Industrial Services
1 Globe Street
Red Bank, NJ 07701
Phone: 732-222-3553
Fax: 732-450-0311

Website: http://www.rbaker.com/

For more information visit our website or contact Damon Kozul, PE, CHMM at dkozul@rbaker.com

Crane Setup on Roof Of Building For Dismantlement Project

Picture Shows how R. Baker & Son All Industrial Services setup a crane on the roof of a large industrial building in order to facilitate the dismantlement of several stacks.

Wednesday, March 23, 2011

Hydraulic Crane Makes Critical Lift - Photo

Photo of Crane making a critical lift - dismantled 300' flare tower dismantled in refinery - top section of tower is rigged to ground using a hydraulic crane - steel was demolished on ground using excavator with shear

INDUSTRIAL AND COMMERICAL RIGGING SERVICES
www.rbaker.com/rigging-contractors.php

www.rbaker.com/dismantling-contractors.php

Rigging Project - Heavy Critical Lift

Photo of Crane making a critical lift - dismantled 300' flare tower dismantled in refinery -

INDUSTRIAL AND COMMERICAL RIGGING SERVICES
www.rbaker.com/rigging-contractors.php

Wednesday, March 9, 2011

Picture of Excavators Demolishing Building in Puerto Rico


Industrial Building Demolition by R. Baker & Son All Industrial Services - Puerto Rico Building Demolition Project

R. Baker & Son All Industrial Services is the premier specialized contractor in the United States, Canada and Puerto Rico. The veteran founded company has been in business since 1935, has over 100 employees, an exemplary safety record (We have been directly involved in four (4) sites that received VPP OSHA Safety Awards) and is financially strong (bonding capabilities over $10 Million). Capabilities include industrial and commercial demolition, rigging, machinery & plant moving, dismantling, decommissioning, plant and equipment relocation, interior demolition, wrecking, selective demolition , demolition contractors in NJ and warehousing.

http://www.rbaker.com/demolition-contractors.php

Building Demolition In Puerto Rico Picture

Building Demolition In Puerto Rico by R. Baker & Son All Industrial

Photo of a Kobelco Excavator with Universal Processor attachment - demolishes manufacturing building

R. Baker & Son All Industrial Services is the premier specialized contractor for dismantlement, decommissioning and demolition in the United States, Canada and Puerto Rico. The veteran owned company has been in business since 1935, has over 100 employees, an exemplary safety record (We have been directly involved in four (4) sites that received VPP OSHA Safety Awards) and is financially strong (bonding capabilities over $10 Million). Capabilities include total plant and facility dismantlement, decommissioning, demolition, plant relocations and re-installations as well as heavy equipment rigging and machinery moving, millwright services and onsite concrete crushing.

http://www.rbaker.com/demolition-contractors.php

Picture | Photo of Heavy Rigging Lift at Petrochemical Facility

Picture Photo of Heavy lift - flare tower at refinery dismantled and piece rigged - critical lift

INDUSTRIAL AND COMMERICAL RIGGING SERVICES
http://www.rbaker.com/rigging-contractors.php

R. Baker & Son All Industrial has performed numerous complex and technical industrial and pharmaceutical rigging and dismantling equipment removal and relocation projects throughout the USA, Canada and Puerto Rico. Most of these rigging projects have been performed on active facilities and plants where safety and attention to nearby operations is paramount. We have in-house master riggers, professional engineers, skilled rigging tradesmen and state of the art rigging equipment to handle the most challenging rigging and machinery moving projects. All rigging projects are conducted with the highest regard to safety, precision, and industrial standards

* Industrial and Commercial Rigging
* Heavy Rigging of Equipment and Machinery
* Rigging and Dismantling of Equipment and Entire Process Lines

Wednesday, February 9, 2011

You're invited to attend INTERPHEX 2011

You're invited to attend INTERPHEX 2011

compliments of:

R. Baker & Son All Industrial Services






Booth Number: Y2541

Web Site: www.rbaker.com



R. Baker & Son All Industrial Services invites you to join us at booth Y2541 to meet Art Sferlazzo and discuss any of your project needs for rigging, plant & machinery moving, demolition and plant and equipment relocations and installations.













REGISTER HERE AND SAVE!*

As a valued customer, please accept our invitation

to SAVE $75 and attend the INTERPHEX 2011 exhibits at no cost.



* Plus, receive a 15% Discount on One- or Two-Day

INTERPHEX Conference Packages with this invitation.











Priority Code: EV113D







* Please note: 15% discount can not be applied to the Exhibits Plus Pass.





R. Baker & Son makes every effort to send you only information we believe you will find useful. We apologize if this information is no longer valuable to you. Please e-mail us at optout@awol.com to be removed from our mailing list.

Tuesday, February 1, 2011

Google Knol How to Rig and Install a Generator

Google Knol on How to Rig and Install a Generator - R. Baker & Son Completes Critical Installation of Generator for Private Client

Monday, January 31, 2011

Large Crtical Lift Crane Photo


Picture Photo - large dismantled piece of ductwork from power plant being rigged by crane. Piece was sent offsite for scrap recycling. Heavy lift plans were developed and strictly followed.

R. Baker & Son All Industrial Services performed numerous dismantling, demolition and rigging services for a coal fired power plant during a turnaround. Industrial services included the dismantling and demolition of an entire precipitator and associated ductwork. Dismantled and demolished pieces were rigged from the plant using cranes and then loaded onto trucks for offsite scrap metal recycling.

For more information go to http://www.rbaker.com/rigging-contractors.php or http://www.rbaker.com/plant-decommissioning-contractors.php

Selective Industrial Demolition Photo - Excavator demolishes building


Picture/Photo of excavator with grapple performing seletive demolition on building near active process and utility lines.

Selective Building Demolition by R. Baker & Son All Industrial Services

R. Baker & Son All Industrial Services is the premier specialized contractor in the United States, Canada and Puerto Rico. The veteran founded company has been in business since 1935, has over 100 employees, an exemplary safety record (We have been directly involved in four (4) sites that received VPP OSHA Safety Awards) and is financially strong (bonding capabilities over $10 Million). Capabilities include industrial and commercial demolition, rigging, machinery & plant moving, dismantling, decommissioning, plant and equipment relocation, interior demolition, wrecking, selective demolition , demolition contractors in NJ and warehousing.

http://www.rbaker.com/demolition-contractors.php
http://www.rbaker.com/selective-demolition.php

Demolition of Hospital by Hand Method Picture Photo


Picture / Photo Selective and Interior Demolition Services. Manual Demolition of a Hospital in Brooklyn, NY

R. Baker & Son All Industrial Services is the premier specialized contractor for dismantlement, decommissioning and demolition in the United States, Canada and Puerto Rico. The veteran owned company has been in business since 1935, has over 100 employees, an exemplary safety record (We have been directly involved in four (4) sites that received VPP OSHA Safety Awards) and is financially strong (bonding capabilities over $10 Million). Capabilities include total plant and facility dismantlement, decommissioning, demolition, plant relocations and re-installations as well as heavy equipment rigging and machinery moving, millwright services and onsite concrete crushing.
http://www.rbaker.com
http://www.rbaker.com/demolition-contractors.php
http://www.rbaker.com/rigging-contractors.php

Friday, January 28, 2011

Picture of Crane Rigging Roof Top Unit


R. Baker & Son All Industrial has performed numerous complex and technical rigging and dismantling equipment removal and relocation projects throughout the USA, Canada and Puerto Rico. Most of these project have been performed on active facilities and plants where safety and attention to nearby operations is paramount. We have in-house master riggers, professional engineers, skilled tradesmen and state of the art equipment to handle the most challenging projects. All projects are conducted with the highest regard to precision, schedule, cost effectiveness and strict safety standards.

RIGGING SERVICES
* Heavy Rigging of Equipment and Machinery
* Rigging of Delicate and Sensitive Pharmaceutical and Manufacturing Equipment
* Rigging and Dismantling of Equipment and Entire Process Lines

MACHINERY AND EQUIPMENT MOVING SERVICES
* Salvage and Removal of Equipment and Machinery
* Match Marking, Re-Installation and Millwrighting

http://www.rbaker.com/rigging-contractors.php

Tower Crane Rigging Dismantled Steel Smoke Stack Section


Picture Photo - Crane Rigging Dismantled Steel Stack Section - Critical Lift

R. Baker & Son All Industrial Services, Inc. performed the decommissioning and dismantling of four (4) gunite lined steel stacks from the top of PSEG’s Glenmont, New York Powerhouse. The 20 ft diameter, 170ft tall stacks sat on top of the 165 ft high building roof for a total height from the ground of 335 ft. R. Baker & Son working together with PSEG Engineering and Lomma Crane decided to utilize a M760 ton Favco tower crane erected on top of the powerhouse to be utilized for the lifting and lowering to ground of stack sections. R. Baker & Son erected and installed a base for the Favco tower crane and tied it directly into the building’s column lines. A 500 ton hydraulic Demag was utilized to hoist workers in a certified man basket over 350 ft. in the air in order to perform rigging and dismantling activities

http://www.rbaker.com/rigging-contractors.php http://www.rbaker.com/dismantling-contractors.php

Power Plant Stack Dismantling and Rigging Photo


Picture Photo - Crane Rigging Dismantled Steel Stack Section - Critical Lift

R. Baker & Son All Industrial Services, Inc. performed the decommissioning and dismantling of four (4) gunite lined steel stacks from the top of PSEG’s Glenmont, New York Powerhouse. The 20 ft diameter, 170ft tall stacks sat on top of the 165 ft high building roof for a total height from the ground of 335 ft. R. Baker & Son working together with PSEG Engineering and Lomma Crane decided to utilize a M760 ton Favco tower crane erected on top of the powerhouse to be utilized for the lifting and lowering to ground of stack sections. R. Baker & Son erected and installed a base for the Favco tower crane and tied it directly into the building’s column lines. A 500 ton hydraulic Demag was utilized to hoist workers in a certified man basket over 350 ft. in the air in order to perform rigging and dismantling activities

http://www.rbaker.com/rigging-contractors.php
http://www.rbaker.com/dismantling-contractors.php

Hydraulic Crane Rigging Dismantled Power PLant Steel Stack Photo


Picture Photo - Crane Rigging Dismantled Steel Stack Section - Critical Lift

R. Baker & Son All Industrial Services, Inc. performed the decommissioning and dismantling of four (4) gunite lined steel stacks from the top of PSEG’s Glenmont, New York Powerhouse. The 20 ft diameter, 170ft tall stacks sat on top of the 165 ft high building roof for a total height from the ground of 335 ft. R. Baker & Son working together with PSEG Engineering and Lomma Crane decided to utilize a M760 ton Favco tower crane erected on top of the powerhouse to be utilized for the lifting and lowering to ground of stack sections. R. Baker & Son erected and installed a base for the Favco tower crane and tied it directly into the building’s column lines. A 500 ton hydraulic Demag was utilized to hoist workers in a certified man basket over 350 ft. in the air in order to perform rigging and dismantling activities

http://www.rbaker.com/rigging-contractors.php
http://www.rbaker.com/dismantling-contractors.php

Picture | Photo Crane RIgging Dismantled Steel Stack


Picture Photo
R. Baker & Son All Industrial Services, Inc. performed the decommissioning and dismantling of four (4) gunite lined steel stacks from the top of PSEG’s Glenmont, New York Powerhouse. The 20 ft diameter, 170ft tall stacks sat on top of the 165 ft high building roof for a total height from the ground of 335 ft. R. Baker & Son working together with PSEG Engineering and Lomma Crane decided to utilize a M760 ton Favco tower crane erected on top of the powerhouse to be utilized for the lifting and lowering to ground of stack sections. R. Baker & Son erected and installed a base for the Favco tower crane and tied it directly into the building’s column lines. A 500 ton hydraulic Demag was utilized to hoist workers in a certified man basket over 350 ft. in the air in order to perform rigging and dismantling activities

http://www.rbaker.com/rigging-contractors.php

Thursday, January 27, 2011

Picture of Large Crane Lowering Very Heavy Piece of Dismantled Steel


Picture of large dismantled piece of duct work from power plant being rigged to ground by large hydraulic crane.

R. Baker & Son All Industrial Services performed numerous dismantling, demolition and rigging services for a coal fired power plant during a turnaround. Industrial services included the dismantling and demolition of an entire precipitator and associated ductwork. Dismantled and demolished pieces were rigged from the plant using cranes and then loaded onto trucks for offsite scrap metal recycling.

For more information go to http://www.rbaker.com/rigging-contractors.php or http://www.rbaker.com/plant-decommissioning-contractors.php

Picture - cranes make critical lift of dismantled flare tower


Picture - cranes make critical lift of dismantled flare tower - heavy rigging pick

INDUSTRIAL AND COMMERICAL RIGGING SERVICES
http://www.rbaker.com/rigging-contractors.php
R. Baker & Son All Industrial has performed numerous complex and technical industrial and pharmaceutical rigging and dismantling equipment removal and relocation projects throughout the USA, Canada and Puerto Rico. Most of these rigging projects have been performed on active facilities and plants where safety and attention to nearby operations is paramount. We have in-house master riggers, professional engineers, skilled rigging tradesmen and state of the art rigging equipment to handle the most challenging rigging and machinery moving projects. All rigging projects are conducted with the highest regard to precision, schedule, cost effectiveness and strict safety standards.

* Industrial and Commercial Rigging
* Heavy Rigging of Equipment and Machinery
* Rigging and Dismantling of Equipment and Entire Process Lines

Wednesday, January 26, 2011

Picture | Photo - Rigging Services at Power Plant


Picture Photo - large dismantled piece of ductwork from power plant rigged out of plant. Piece was sent offsite for scrap recycling. Heavy lift plans were developed and strictly followed.

R. Baker & Son All Industrial Services performed numerous dismantling, demolition and rigging services for a coal fired power plant during a turnaround. Industrial services included the dismantling and demolition of an entire precipitator and associated ductwork. Dismantled and demolished pieces were rigged from the plant using cranes and then loaded onto trucks for offsite scrap metal recycling.

For more information go to http://www.rbaker.com/rigging-contractors.php or http://www.rbaker.com/plant-decommissioning-contractors.php

Photo of Crane making a critical lift and Heavy Lift


Photo of Crane making a critical lift - dismantled 300' flare tower dismantled in refinery -

INDUSTRIAL AND COMMERICAL RIGGING SERVICES
http://www.rbaker.com/rigging-contractors.php

R. Baker & Son All Industrial has performed numerous complex and technical industrial and pharmaceutical rigging and dismantling equipment removal and relocation projects throughout the USA, Canada and Puerto Rico. Most of these rigging projects have been performed on active facilities and plants where safety and attention to nearby operations is paramount. We have in-house master riggers, professional engineers, skilled rigging tradesmen and state of the art rigging equipment to handle the most challenging rigging and machinery moving projects. All rigging projects are conducted with the highest regard to precision, schedule, cost effectiveness and strict safety standards.

* Industrial and Commercial Rigging
* Heavy Rigging of Equipment and Machinery
* Rigging and Dismantling of Equipment and Entire Process Lines

Crane Lifts Dismantled Column Critical Lift Photo


Picture of hydraulic crane rigging a dismantled steel column. Critical lift plan was developed. -

INDUSTRIAL AND COMMERICAL RIGGING SERVICES
http://www.rbaker.com/rigging-contractors.php

R. Baker & Son All Industrial has performed numerous complex and technical industrial and pharmaceutical rigging and dismantling equipment removal and relocation projects throughout the USA, Canada and Puerto Rico. Most of these rigging projects have been performed on active facilities and plants where safety and attention to nearby operations is paramount. We have in-house master riggers, professional engineers, skilled rigging tradesmen and state of the art rigging equipment to handle the most challenging rigging and machinery moving projects. All rigging projects are conducted with the highest regard to precision, schedule, cost effectiveness and strict safety standards.

* Industrial and Commercial Rigging
* Heavy Rigging of Equipment and Machinery
* Rigging and Dismantling of Equipment and Entire Process Lines

Picture - Crane Used to Rig Dismantled Steel Column Sections


Picture - Large hydraulic crane dismantles steel column structure in petrochemical plant - critical lift of dismantled piece shown

INDUSTRIAL AND COMMERICAL RIGGING SERVICES
http://www.rbaker.com/rigging-contractors.php

R. Baker & Son All Industrial has performed numerous complex and technical industrial and pharmaceutical rigging and dismantling equipment removal and relocation projects throughout the USA, Canada and Puerto Rico. Most of these rigging projects have been performed on active facilities and plants where safety and attention to nearby operations is paramount. We have in-house riggers, professional engineers, and state of the art rigging equipment to handle the most challenging rigging and machinery moving projects. All rigging projects are conducted with the highest regard to precision, schedule, cost effectiveness and strict safety standards.

* Industrial and Commercial Rigging
* Heavy Rigging of Equipment and Machinery
* Rigging and Dismantling of Equipment and Entire Process Lines

Picture - Large hydraulic crane performs critical lift


Picture - Large hydraulic crane dismantles structure in petrochemical plant - critical lift picture

INDUSTRIAL AND COMMERICAL RIGGING SERVICES
http://www.rbaker.com/rigging-contractors.php

R. Baker & Son All Industrial has performed numerous complex and technical industrial and pharmaceutical rigging and dismantling equipment removal and relocation projects throughout the USA, Canada and Puerto Rico. Most of these rigging projects have been performed on active facilities and plants where safety and attention to nearby operations is paramount. We have in-house riggers, professional engineers, and state of the art rigging equipment to handle the most challenging rigging and machinery moving projects. All rigging projects are conducted with the highest regard to precision, schedule, cost effectiveness and strict safety standards.

* Industrial and Commercial Rigging
* Heavy Rigging of Equipment and Machinery
* Rigging and Dismantling of Equipment and Entire Process Lines

Wednesday, January 19, 2011

Picture Industrial Rigging Lifting Turbine Cover Using Overhead Crane



R. Baker & Son All industrial Services performed decommissioning work at a large power plant - Utilizing an overhead crane, R. Baker & Son liftuing the turbine covers off. Picture shows turbine cover being lifted off. Lifting plans and all other safety measures were in place prior to critical lift.

INDUSTRIAL AND COMMERICAL RIGGING SERVICES
http://www.rbaker.com/rigging-contractors.php

R. Baker & Son All Industrial has performed numerous complex and technical industrial and pharmaceutical rigging and dismantling equipment removal and relocation projects throughout the USA, Canada and Puerto Rico. Most of these rigging projects have been performed on active facilities and plants where safety and attention to nearby operations is paramount. We have in-house master riggers, professional engineers, skilled rigging tradesmen and state of the art rigging equipment to handle the most challenging rigging and machinery moving projects. All rigging projects are conducted with the highest regard to precision, schedule, cost effectiveness and strict safety standards.

* Industrial and Commercial Rigging
* Heavy Rigging of Equipment and Machinery
* Rigging of Delicate and Sensitive Pharmaceutical and Manufacturing Equipment
* Rigging and Dismantling of Equipment and Entire Process Lines

Industrial Rigging Picture Crane Performs Critical Lift



R. Baker & Son was tasked with demolishing a large industrial building. Due to proximity of nearby utilities and active operations, building needed to be dismantled. Picture shows crane lifting large piece of dismantled building section. This was a critical lift with rigging plans developed as well as all other safety and rigging plans and documents.

INDUSTRIAL AND COMMERICAL RIGGING SERVICES
http://www.rbaker.com/rigging-contractors.php

R. Baker & Son All Industrial has performed numerous complex and technical industrial and pharmaceutical rigging and dismantling equipment removal and relocation projects throughout the USA, Canada and Puerto Rico. Most of these rigging projects have been performed on active facilities and plants where safety and attention to nearby operations is paramount. We have in-house master riggers, professional engineers, skilled rigging tradesmen and state of the art rigging equipment to handle the most challenging rigging and machinery moving projects. All rigging projects are conducted with the highest regard to precision, schedule, cost effectiveness and strict safety standards.

* Industrial and Commercial Rigging
* Heavy Rigging of Equipment and Machinery
* Rigging of Delicate and Sensitive Pharmaceutical and Manufacturing Equipment
* Rigging and Dismantling of Equipment and Entire Process Lines

Google Knol on Industrial Rigging Contractor Services

Google Knol on Industrial Rigging Contractor Services - Heavy Rigging, Plant and Machinery Moving and more.

Google Knol on Relocation and Install of USS Intrepid Propeller

Google Knol on Relocation and Install of USS Intrepid Propeller -

Tuesday, January 18, 2011

Industrial Rigging Services and Heavy Lift Pictures


Picasa Web Album For Pictures and Photos of Rigging and Heavy Lift Project Completed

R. Baker & Son All Industrial has performed numerous complex and technical industrial and pharmaceutical rigging and dismantling equipment removal and relocation projects throughout the USA, Canada and Puerto Rico. Most of these rigging projects have been performed on active facilities and plants where safety and attention to nearby operations is paramount. We have in-house master riggers, professional engineers, skilled rigging tradesmen and state of the art rigging equipment to handle the most challenging rigging and machinery moving projects. All rigging projects are conducted with the highest regard to precision, schedule, cost effectiveness and strict safety standards.

Picture of Hydraulic Crane Preparing Critical Lift


Picture of hydraulic crane preparing for heavy lift / critical lift - dismantling of equipment and structures at a petroleum refinery

INDUSTRIAL AND COMMERICAL RIGGING SERVICES

http://www.rbaker.com/rigging-contractors.php

R. Baker & Son All Industrial has performed numerous complex and technical industrial and pharmaceutical rigging and dismantling equipment removal and relocation projects throughout the USA, Canada and Puerto Rico. Most of these rigging projects have been performed on active facilities and plants where safety and attention to nearby operations is paramount. We have in-house master riggers, professional engineers, skilled rigging tradesmen and state of the art rigging equipment to handle the most challenging rigging and machinery moving projects. All rigging projects are conducted with the highest regard to precision, schedule, cost effectiveness and strict safety standards.

* Industrial and Commercial Rigging
* Heavy Rigging of Equipment and Machinery
* Rigging of Delicate and Sensitive Pharmaceutical and Manufacturing Equipment
* Rigging and Dismantling of Equipment and Entire Process Lines

Industrial Rigging Photo Crane Critical Lift



Crane making a critical lift of a dismantled section of building.

INDUSTRIAL AND COMMERICAL RIGGING SERVICES
http://www.rbaker.com/rigging-contractors.php

R. Baker & Son All Industrial has performed numerous complex and technical industrial and pharmaceutical rigging and dismantling equipment removal and relocation projects throughout the USA, Canada and Puerto Rico. Most of these rigging projects have been performed on active facilities and plants where safety and attention to nearby operations is paramount. We have in-house master riggers, professional engineers, skilled rigging tradesmen and state of the art rigging equipment to handle the most challenging rigging and machinery moving projects. All rigging projects are conducted with the highest regard to precision, schedule, cost effectiveness and strict safety standards.

* Industrial and Commercial Rigging
* Heavy Rigging of Equipment and Machinery
* Rigging of Delicate and Sensitive Pharmaceutical and Manufacturing Equipment
* Rigging and Dismantling of Equipment and Entire Process Lines

Picture Large Dismantled Ductwork From Power Plant

Large dismantled ductwork being loaded onto flatbed for offsite recycling - R. Baker & Son All Industrial Services performed numerous dismantling, demolition and rigging services for a coal fired power plant during a turnaround. Industrial services included the dismantling and demolition of an entire precipitator and associated ductwork. Dismantled and demolished pieces were rigged from the plant using cranes and then loaded onto trucks for offsite scrap metal recycling. For more information go to http://www.rbaker.com/rigging-contractors.php or http://www.rbaker.com/plant-decommissioning-contractors.php

Friday, January 14, 2011

Google Knol on Selective Demolition of LNG Vaporizers

R. Baker & Son All Industrial Services (R. Baker & Son) recently completed the demolition of three (3) Liquid Nitrogen Gas (LNG) vaporizers including piping, conduits and selected foundations at an active LNG facility in New Jersey. The large energy services client contracted R. Baker & Son due to their exemplary safety record, expert selective demolition services and competitive rates.

Riggers work to load dismantled ductwork from Power Plant | Picture


Riggers work to load dismantled ductwork onto truck safely for offsite recycling - R. Baker & Son All Industrial Services performed numerous dismantling, demolition and rigging services for a coal fired power plant during a turnaround. Industrial services included the dismantling and demolition of an entire precipitator and associated ductwork. Dismantled and demolished pieces were rigged from the plant using cranes and then loaded onto trucks for offsite scrap metal recycling. For more information go to http://www.rbaker.com/rigging-contractors.php or http://www.rbaker.com/plant-decommissioning-contractors.php

Picture of Large Dismantled Ductwork From Power Plant Project


Picture - dismantled piece of ductwork from precipitator demolition R. Baker & Son All Industrial Services performed numerous dismantling, demolition and rigging services for a coal fired power plant during a turnaround. Industrial services included the dismantling and demolition of an entire precipitator and associated ductwork. Dismantled and demolished pieces were rigged from the plant using cranes and then loaded onto trucks for offsite scrap metal recycling. For more information go to http://www.rbaker.com/rigging-contractors.php or http://www.rbaker.com/plant-decommissioning-contractors.php

Thursday, January 13, 2011

Coal Power Plant Turnaround Work Photo Album


R. Baker & Son Al...
Photos Profile

Jan 13, 2011
photos: 17 – 6 MB
Public on the web

R. Baker & Son All Industrial Services performed numerous dismantling, demolition and rigging services for a coal fired power plant during a turnaround. Industrial services included the dismantling and demolition of an entire precipitator and associated ductwork. Dismantled and demolished pieces were rigged from the plant using cranes and then loaded onto trucks for offsite scrap metal recycling. For more information go to http://www.rbaker.com/

About R. Baker & Son All Industrial Services

R. Baker & Son All Industrial Services is the premier specialized contractor in the United States, Canada and Puerto Rico. The veteran founded company has been in business since 1935, has over 100 employees, an exemplary safety record (We have been directly involved in four (4) sites that received VPP OSHA Safety Awards) and is financially strong (bonding capabilities over $10 Million). Capabilities include industrial and commercial demolition, rigging, machinery & plant moving, dismantling, decommissioning, plant and equipment relocation, interior demolition, wrecking, selective demolition , demolition contractors in NJ and warehousing.

Picture US Army Helicopter Rigged onto USS Intrepid Museum


Another picture of an US Army helicopter being rigged onto the USS Intrepid Museum
R. Baker & Son All Industrial Services, a global rigging and equipment relocation contractor, completed numerous rigging projects at the Intrepid Sea, Air and Space Museum in New York consisting of the moving of prized military aircraft, ship propellers, the Britsh Airways Concorde engine as well as other historic and priceless artifacts. http://www.rbaker.com/rigging-contractors.php

Picture Rigging of Helicopter at USS Intrepid Museum


R. Baker & Son All Industrial Services, a global rigging and equipment relocation contractor, completed numerous rigging projects at the Intrepid Sea, Air and Space Museum in New York consisting of the moving of prized military aircraft, ship propellers, the Britsh Airways Concorde engine as well as other historic and priceless artifacts. http://www.rbaker.com/rigging-contractors.php

Monday, January 10, 2011

New Jersey Demolition Contractors Services by R. Baker & Son

Demolition Contractors Services Throughout New Jersey (NJ) and Entire USA

Safety is first and foremost at R. Baker & Son All Industrial Services.

R. Baker & Son All Industrial Services provides industrial and commercial demolition services in New Jersey as well as throughout the United States, Puerto Rico and Canada. We take great pride in our exceptional safety record, expert trained employees and our fleet of specialized demolition heavy equipment.

Our safe and expert demolition contractor services in New Jersey include:
  • Industrial and Commercial Building Demolition Services
  • Total Facility and Plant Demolition
  • Selective and Surgical Demolition of Structures
  • Concrete and Steel Silo Demolition
  • Water Tower Wrecking
  • Steel Tank Dismantling
  • Dismantling of All Types of Equipment and Structures
  • Power Plant Demolition and Dismantling
  • All Types of Structures and Buildings Demolished in New Jersey
About R. Baker & Son All Industrial Services

R. Baker & Son All Industrial Services is the premier specialized contractor in the United States, Canada and Puerto Rico.  The veteran owned company has been in business since 1935, has over 100 employees, an exemplary safety record (We have been directly involved in four (4) sites that received VPP OSHA Safety Awards) and is financially strong (bonding capabilities over $10 Million).  Capabilities include industrial and commercial demolition, riggingmachinery & plant moving, dismantling, decommissioning, plant and equipment relocation, interior demolition, wrecking, selective demolition and warehousing.

R. Baker & Son All Industrial Services - Main Office
1 Globe Street
Red Bank, NJ 07701
Phone: 732-222-3553
Fax: 732-450-0311

Website: http://www.rbaker.com/
For more information visit our website or contact Damon Kozul, PE, CHMM at dkozul@rbaker.com

Thursday, January 6, 2011

Expert Demolition Contractor Services in New Jersey

Demolition Contractors Services Throughout New Jersey (NJ) and Nationwide USA


R. Baker & Son All Industrial Services provides industrial and commercial demolition services throughout New Jersey as well as nationwide USA, Puerto Rico and Canada. We take great pride in our exceptional safety record, expert trained employees and our fleet of specialized demolition heavy equipment.

Our safe and expert demolition contractor services in New Jersey include:
  • Industrial and Commercial Building Demolition Services
  • Total Facility and Plant Demolition
  • Selective and Surgical Demolition of Structures
  • Concrete and Steel Silo Demolition
  • Water Tower Wrecking
  • Steel Tank Dismantling
  • Dismantling of All Types of Equipment and Structures
  • Power Plant Demolition and Dismantling
  • All Types of Structures and Buildings Demolished in New Jersey
About R. Baker & Son All Industrial Services

R. Baker & Son All Industrial Services is the premier specialized contractor in the United States, Canada and Puerto Rico.  The veteran owned company has been in business since 1935, has over 100 employees, an exemplary safety record (We have been directly involved in four (4) sites that received VPP OSHA Safety Awards) and is financially strong (bonding capabilities over $10 Million).  Capabilities include industrial and commercial demolition, riggingmachinery & plant moving, dismantling, decommissioning, plant and equipment relocation, interior demolition, wrecking, selective demolition and warehousing.

R. Baker & Son All Industrial Services - Main Office
1 Globe Street
Red Bank, NJ 07701
Phone: 732-222-3553
Fax: 732-450-0311

Website: http://www.rbaker.com/
For more information visit our website or contact Damon Kozul, PE, CHMM at dkozul@rbaker.com