Like New York, Tokyo, Japan is a highly-populated, densely-packed city. Many of Tokyo’s mid-20th century high-rise buildings are becoming obsolete and must be demolished. Japanese companies have developed two groundbreaking techniques for dismantling skyscrapers, referred to by some as “stealth” demolition, that could be utilized in New York City in the near future. One demolition method entails buildings being dismantled from the top down, with all of the work hidden under a moving scaffold, and the other, remarkably, has structures being dismantled from the ground up.
Only a handful of New York skyscrapers have been demolished during the last 50 years (most recently the Deutsche Bank building in lower Manhattan), but like Tokyo, many are in need of renovation or demolition. Many aging high-rises have low ceilings, limited floor space, single-pane glass, and outdated heating and cooling systems, but overhaul is oftentimes economically unfeasible, so the best option may be to demolish and rebuild. Implosion and wrecking balls are not permitted in NYC, so the conventional method of high-rise demolition entails contractors erecting scaffolding all the way up and around the building, and dismantling it floor by floor. The work is noisy, dirty, and creates an eyesore for New Yorkers.
With the top-down demolition method, an enclosed scaffold “cap” that resembles the building’s façade is constructed over the roof on temporary columns supported by hydraulic jacks. Workers demolish the building two floors at a time, and the columns are lowered into new positions. Because all work takes place under the cap, noise levels are 20 decibels lower than tradition methods and 90% more dust is contained. The work is hidden from passersby, and many people are not even aware that buildings are being demolished until late stages of the demolition.
The reverse of the above demolition method is a bottom-up approach in which steel columns are cut at ground level and the entire building is lowered in 30-inch increments on huge hydraulic jacks as each floor is dismantled. This eliminates the need to have work crews and heavy equipment at the top of the building and is safer than traditional methods.
Other benefits to these new demolition techniques include more efficient abatement of hazardous materials like asbestos, and easier sorting of recyclables such as steel, aluminum, copper and concrete.
Though the Japanese demolition techniques have not yet been used in the U.S ., there will come a time in the very near future when more and more outdated Manhattan high-rise buildings will need to be demolished, and there is a good chance that New York City area contractors will be adopting these innovative methods.
About R. Baker & Son All Industrial Services
R. Baker & Son All Industrial Services, a Service-Disabled Veteran-Owned Small Business (SDVOSB) in business since 1935, is a premier specialized contractor operating in the United States, Canada and Puerto Rico, with over one hundred employees and an exemplary safety record (we have been directly involved in four sites that received VPP OSHA Safety Awards). R. Baker & Son is financially strong, with bonding capabilities over $10 million. Capabilities include industrial and commercial demolition, rigging, machinery- and plant-moving, dismantling, decommissioning, plant and equipment relocation, interior demolition, selective demolition, warehousing, wrecking and razing, millwright, plant reconfigurations, heavy rigging, salvage, environmental services, remediation, decontamination, abatement, and investment and asset recovery..
Demolition, wrecking and razing, rigging, millwright, plant reconfigurations, heavy rigging, Service-Disabled Veteran-Owned Small Business / SDVOSB, salvage, dismantling, decommissioning, plant and machinery moving, building demolition, riggers, environmental services, remediation, decontamination, abatement, interior demolition, investment and asset recovery.
R. Baker & Son All Industrial Services
1 Globe Court
Red Bank, NJ 07701
Phone: 732-222-3553
Fax: 732-450-0311
Web: http://www.rbaker.com
Facebook: https://www.facebook.com/Demolition.Rigging
Welcome to the R. Baker and Son All Industrial Services Blog. Veteran founded, specialized contractor in business since 1935. Experts in power plant decommissioning, dismantlement, building demolition, heavy industrial rigging, machinery and equipment moving, curtain wall, wrecking, razing and onsite concrete crushing. Company operates throughout the United States, Puerto Rico and Canada.
Friday, August 23, 2013
Monday, August 5, 2013
Riggers and Millwrights
Top rigging, dismantling and demolition contractors like R. Baker & Son rely on the extensive knowledge, skill, and experience of riggers and millwrights. So what, exactly, are millwrights and riggers, and what do they do?
Millwright:
A millwright is a tradesperson who installs, maintains and repairs stationary industrial machinery and mechanical equipment by interpreting blueprints and schematics, constructing foundations, performing layouts, and assembling parts to perfect working order. Millwrights must possess a combination of skills and knowledge that includes steel fabrication, welding, machining, electronics, and fluid mechanics. They are trained through apprenticeship programs that combine classroom education with on-the-job training. Most apprenticeships last four years and may include an Associate degree.
Rigger:
A journeyman rigger is a tradesperson who specializes in lifting, moving, and placing extremely large or heavy loads, machinery, and objects using specialized equipment. Riggers are responsible for staging loads and determining their sizes and weights; building or assembling jibs, derricks, cranes, booms, and other components; setting up rigging gear, cables, pulleys, and other tackle; erecting structural steel and concrete panels, etc.; and maintaining rigging equipment. Rigging is learned through apprenticeship.
About R. Baker & Son All Industrial Services
R. Baker & Son All Industrial Services, a Service-Disabled Veteran-Owned Small Business (SDVOSB) in business since 1935, is a premier specialized contractor operating in the United States, Canada and Puerto Rico, with over one hundred employees and an exemplary safety record (we have been directly involved in four sites that received VPP OSHA Safety Awards). R. Baker & Son is financially strong, with bonding capabilities over $10 million. Capabilities include industrial and commercial demolition, rigging, machinery- and plant-moving, dismantling, decommissioning, plant and equipment relocation, interior demolition, selective demolition, warehousing, wrecking and razing, millwright, plant reconfigurations, heavy rigging, salvage, environmental services, remediation, decontamination, abatement, and investment and asset recovery..
Demolition, wrecking and razing, rigging, millwright, plant reconfigurations, heavy rigging, Service-Disabled Veteran-Owned Small Business / SDVOSB, salvage, dismantling, decommissioning, plant and machinery moving, building demolition, riggers, environmental services, remediation, decontamination, abatement, interior demolition, investment and asset recovery.
R. Baker & Son All Industrial Services
1 Globe Street
Red Bank, NJ 07701
Phone: 732-222-3553
Fax: 732-450-0311
Web: http://www.rbaker.com/demolition-contractors-new-york.php
Facebook: https://www.facebook.com/Demolition.Rigging
Top rigging, dismantling and demolition contractors like R. Baker & Son rely on the extensive knowledge, skill, and experience of riggers and millwrights. So what, exactly, are millwrights and riggers, and what do they do?
Millwright:
A millwright is a tradesperson who installs, maintains and repairs stationary industrial machinery and mechanical equipment by interpreting blueprints and schematics, constructing foundations, performing layouts, and assembling parts to perfect working order. Millwrights must possess a combination of skills and knowledge that includes steel fabrication, welding, machining, electronics, and fluid mechanics. They are trained through apprenticeship programs that combine classroom education with on-the-job training. Most apprenticeships last four years and may include an Associate degree.
Rigger:
A journeyman rigger is a tradesperson who specializes in lifting, moving, and placing extremely large or heavy loads, machinery, and objects using specialized equipment. Riggers are responsible for staging loads and determining their sizes and weights; building or assembling jibs, derricks, cranes, booms, and other components; setting up rigging gear, cables, pulleys, and other tackle; erecting structural steel and concrete panels, etc.; and maintaining rigging equipment. Rigging is learned through apprenticeship.
About R. Baker & Son All Industrial Services
R. Baker & Son All Industrial Services, a Service-Disabled Veteran-Owned Small Business (SDVOSB) in business since 1935, is a premier specialized contractor operating in the United States, Canada and Puerto Rico, with over one hundred employees and an exemplary safety record (we have been directly involved in four sites that received VPP OSHA Safety Awards). R. Baker & Son is financially strong, with bonding capabilities over $10 million. Capabilities include industrial and commercial demolition, rigging, machinery- and plant-moving, dismantling, decommissioning, plant and equipment relocation, interior demolition, selective demolition, warehousing, wrecking and razing, millwright, plant reconfigurations, heavy rigging, salvage, environmental services, remediation, decontamination, abatement, and investment and asset recovery..
Demolition, wrecking and razing, rigging, millwright, plant reconfigurations, heavy rigging, Service-Disabled Veteran-Owned Small Business / SDVOSB, salvage, dismantling, decommissioning, plant and machinery moving, building demolition, riggers, environmental services, remediation, decontamination, abatement, interior demolition, investment and asset recovery.
R. Baker & Son All Industrial Services
1 Globe Street
Red Bank, NJ 07701
Phone: 732-222-3553
Fax: 732-450-0311
Web: http://www.rbaker.com/demolition-contractors-new-york.php
Facebook: https://www.facebook.com/Demolition.Rigging
Subscribe to:
Posts (Atom)